OIL SKIMMER PX

Oil separator for groundwater applications, requires a drilled hole of only 50 mm which can be 30 meters deep. Pick up and separate the oil without pumps or filters.

Facts about Oil Skimming>>

The Abanaki PetroXtractor is a dependable and cost effective way of removing oil, fuel, and other floating hydrocarbons from water where access to the fluid surface is limited. It acts efficiently as remediation equipment for groundwater contaminated by oil, using existing recovery and monitoring wells.
Often, the PetroXtractor Well Oil Skimmer alone will reduce oil or fuel content to  acceptable E.P.A. levels. Models are available for two inch, four inch and six inch or larger ID well casings, with removal rates up to 12 gph. (based on SEA 30 motor oil). Depths of 100 feet or more can be accommodated without the use of pumps.

The PX Well Oil Skimmer can be installed in existing wells by mounting it on a flat surface above the well casing. Oil Skimmer operation consists of merely lowering the belt and tail pulley into the casing until the pulley is fully immersed, placing the discharge hose in a container, and switching the unit on.